Geographic information system-based determination of priority monitoring areas for hazardous air pollutants in an industrial city.

Industrial cities are hotspots for many hazardous air pollutants (HAPs), which are detrimental to human health. We devised an identification method to determine priority HAP monitoring areas using a comprehensive approach involving monitoring, modeling, and demographics. The methodology to identify the priority HAP monitoring area consists of two parts: (1) mapping the spatial distribution of selected categories relevant to the target pollutant and (2) integrating the distribution maps of various categories and subsequent scoring. The identification method was applied in Ulsan, the largest industrial city in South Korea, to identify priority HAP monitoring areas. Four categories related to HAPs were used in the method: (1) concentrations of HAPs, (2) amount of HAP emissions, (3) the contribution of industrial activities, and (4) population density in the city. This method can be used to select priority HAP monitoring areas for intensive monitoring campaigns, cohort studies, and epidemiological studies.

Identification of hazardous organic compounds in e-waste plastic using non-target and suspect screening approaches.

End-of-life electric and electronic devices stand as one of the fastest growing wastes in the world and, therefore, a rapidly escalating global concern. A relevant fraction of these wastes corresponds to polymeric materials containing a plethora of chemical additives. Some of those additives fall within the category of hazardous organic compounds (HOCs). Despite the significant advances in the capabilities of analytical methods, the comprehensive characterization of WEEE plastic remains as a challenge. This research strives to identify the primary additives within WEEE polymers by implementing a non-target and suspect screening approach. Gas chromatography coupled to time-of-flight mass spectrometry (GC-QTOF-MS), using electron ionization (EI), was applied for the detection and identification of more than 300 substances in this matrix. A preliminary comparison was carried out with nominal resolution EI-MS spectra contained in the NIST17 library. BPA, flame retardants, UV-filters, PAHs, and preservatives were among the compounds detected. Fifty-one out of 300 compounds were confirmed by comparison with authentic standards. The study establishes a comprehensive database containing m/z ratios and accurate mass spectra of characteristic compounds, encompassing HOCs. Semi-quantification of the predominant additives was conducted across 48 WEEE samples collected from handling and dismantling facilities in Galicia. ABS plastic demonstrated the highest median concentrations, ranging from 0.154 to 4456 µg g-1, being brominated flame retardants and UV filters, the families presenting the highest concentrations. Internet router devices revealed the highest concentrations, containing a myriad of HOCs, such as tetrabromobisphenol A (TBBPA), tribromophenol (TBrP), triphenylphosphate (TPhP), tinuvin P and bisphenol A (BPA), most of which are restricted in Europe.

Recycled tire rubber materials in the spotlight. Determination of hazardous and lethal substances.

One way of recycling end-of-life tires is by shredding them to obtain crumb rubber, a microplastic material (<0.5 mm), used as infill in artificial turf sports fields or as playground flooring. There is emerging concern about the health and environmental consequences that this type of surfaces can cause. This research aims to develop an analytical methodology able to determine 11 compounds of environmental and health concern, including antiozonants such as N-1,3-dimethylbutyl-N'-phenyl-p-phenylenediamine (6PPD) or N, N´-diphenyl-1,4-phenylenediamine (DPPD), and vulcanization and crosslinking agents, such as N-cyclohexylbenzothiazole-2-sulfenamide (CBS), 1,3-di-o-tolylguanidine (DTG) or hexamethoxymethylmelamine (HMMM) from tire rubber. Ultrasound assisted extraction followed by liquid chromatography coupled to tandem mass spectrometry (UAE-LC-MS/MS) is validated demonstrating suitability. The methodology is applied to monitor the target compounds in forty real crumb rubber samples of different origin including, football pitches, outdoor and indoor playgrounds, urban pavements, commercial samples, and tires. Several alternative infill materials, such as sand, cork granulates, thermoplastic elastomers and coconut fibres, are also collected and analysed. All the target analytes are identified and quantified in the crumb rubber samples. The antiozonant 6PPD is present at the highest concentrations up to 0.2 % in new synthetic fields. The tire rubber-derived chemical 6PPD-quinone (2-((4-methylpentan-2-yl)amino)-5-(phenylamino)cyclohexa-2,5-diene-1,4-dione), recently linked to acute mortality in salmons, is found in all types of crumb rubber samples attaining concentrations up to 40 µg g-1 in football pitches. The crosslinking agent HMMM is detected in most of the playing surfaces, at concentrations up to 36 µg g-1. The tested infill alternatives are free of most of the target compounds. To the best of our knowledge, this study is the largest study considering the target compounds in tire rubber particles and the first to focus on these compounds in playgrounds including the analysis of HMMM, 6PPD-quinone and DTG in crumb rubber used as an infill material.

G-YOLO: A YOLOv7-based target detection algorithm for lightweight hazardous chemical vehicles.

Hazardous chemical vehicles are specialized vehicles used for transporting flammable gases, medical waste, and liquid chemicals, among other dangerous chemical substances. During their transportation, there are risks of fire, explosion, and leakage of hazardous materials, posing serious threats to human safety and the environment. To mitigate these possible hazards and decrease their probability, this study proposes a lightweight object detection method for hazardous chemical vehicles based on the YOLOv7-tiny model.The method first introduces a lightweight feature extraction structure, E-GhostV2 network, into the trunk and neck of the model to achieve effective feature extraction while reducing the burden of the model. Additionally, the PConv is used in the model's backbone to effectively reduce redundant computations and memory access, thereby enhancing efficiency and feature extraction capabilities. Furthermore, to address the problem of performance degradation caused by overemphasizing high-quality samples, the model adopts the WIoU loss function, which balances the training effect of high-quality and low-quality samples, enhancing the model's robustness and generalization performance. Experimental results demonstrate that the improved model achieves satisfactory detection accuracy while reducing the number of model parameters, providing robust support for theoretical research and practical applications in the field of hazardous chemical vehicle object detection.

A Hazard-Based Framework for Identifying Safer Alternatives to Classes of Chemicals: A Case Study on Phthalates in Consumer Products.

BACKGROUND: Humans are exposed to hazardous chemicals found in consumer products. In 2019, the Pollution Prevention for Healthy People and Puget Sound Act was passed in Washington State. This law is meant to reduce hazardous chemicals in consumer products and protect human health and the environment. The law directs the Washington State Department of Ecology to assess chemicals and chemical classes found in products, determine whether there are safer alternatives, and make regulatory determinations. OBJECTIVES: To implement the law, the Department of Ecology developed a hazard-based framework for identifying safer alternatives to classes of chemicals. METHODS: We developed a hazard-based framework, termed the "Criteria for Safer," to set a transparent bar for determining whether new chemical alternatives are safer than existing classes of chemicals. Our "Criteria for Safer" is a framework that builds on existing hazard assessment methodologies and published approaches for assessing chemicals and chemical classes. DISCUSSION: We describe implementation of our criteria using a case study on the phthalates chemical class in two categories of consumer products: vinyl flooring and fragrances used in personal care and beauty products. Additional context and considerations that guided our decision-making process are also discussed, as well as benefits and limitations of our approach. This paper gives insight into our development and implementation of a hazard-based framework to address classes of chemicals in consumer products and will aid others working to build and employ similar approaches. https://doi.org/10.1289/EHP13549.

Development of the Korean construction job exposure matrix (KoConJEM) based on experts' judgment using the 60 consolidated occupations for construction workers.

BACKGROUND: This study was conducted as an effort to develop a Korean construction job exposure matrix (KoConJEM) based on 60 occupations recently consolidated by the construction workers mutual aid association for use by the construction industry. METHODS: The probability, intensity, and prevalence of exposure to 26 hazardous agents for 60 consolidated occupations were evaluated as binary (Yes/No) or four categories (1 to 4) by 30 industrial hygiene experts. The score for risk was calculated by multiplying the exposure intensity by the prevalence of exposure. Fleiss' kappa for each hazardous agent and occupation was used to determine agreement among the 30 experts. The JEM was expressed on a heatmap and a web-based dashboard to facilitate comparison of factors affecting exposure according to each occupation and hazardous agent. RESULTS: Awkward posture, heat/cold, heavy lifting, and noise were hazardous agents regarded as exposure is probable by at least one or more experts in all occupations, while exposure to asphalt fumes was considered hazardous in the smallest number of occupations (n = 5). Based on the degree of agreement among experts, more than half of the harmful factors and most occupations showed fair to good results. The highest risk value was 16 for awkward posture for most occupations other than safety officer. CONCLUSIONS: The KoConJEM provides information on the probability, intensity, and prevalence of exposure to harmful factors, including most occupations employing construction workers; therefore, it may be useful in the conduct of epidemiological studies on assessment of health risk for construction workers.

Occupational exposure to chemical substances and health outcomes among hospital environmental services workers: A scoping review of international studies.

Environmental services (EVS) workers are essential to preventing the spread of disease in hospitals. However, their exposure to hazardous chemicals and drugs is understudied. This scoping review will synthesize literature on hazardous chemical exposures and adverse health outcomes among EVS workers to identify research gaps and trends for further investigation. The scoping review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines to ensure complete and accurate reporting. The scoping review included 25 studies on occupational exposure to chemicals among EVS workers in hospitals. Most studies focused on exposure to cleaning products, which led to dermal, respiratory, and ocular symptoms, oxidative stress, and inflammation. While personal protective equipment (PPE), training, education, and policies have the potential to enhance safety, further research is required to examine the long-term impacts of exposure and the cost-effectiveness of interventions. Future studies should utilize longitudinal approaches and self-reported data collection methods, such as diaries and interviews, to comprehensively assess exposure risks and develop effective interventions and policies. Future research is needed to understand the potential health risks faced by EVS workers from exposure to chemicals in hospitals. Longitudinal studies with objective exposure assessments and larger sample sizes should be conducted. Policies and interventions must be developed and implemented to improve safe work practices and reduce negative health outcomes.

Innovative analytical methodologies for characterizing chemical exposure with a view to next-generation risk assessment.

The chemical burden on the environment and human population is increasing. Consequently, regulatory risk assessment must keep pace to manage, reduce, and prevent adverse impacts on human and environmental health associated with hazardous chemicals. Surveillance of chemicals of known, emerging, or potential future concern, entering the environment-food-human continuum is needed to document the reality of risks posed by chemicals on ecosystem and human health from a one health perspective, feed into early warning systems and support public policies for exposure mitigation provisions and safe and sustainable by design strategies. The use of less-conventional sampling strategies and integration of full-scan, high-resolution mass spectrometry and effect-directed analysis in environmental and human monitoring programmes have the potential to enhance the screening and identification of a wider range of chemicals of known, emerging or potential future concern. Here, we outline the key needs and recommendations identified within the European Partnership for Assessment of Risks from Chemicals (PARC) project for leveraging these innovative methodologies to support the development of next-generation chemical risk assessment.

[Study on the implementation effect evaluation of Specifications of Air Sampling for Hazardous Substances Monitoring in the Workplace (GBZ 159-2004)].

Systematically evaluate the implementation of Specifications of Air Sampling for Hazardous Substances Monitoring (GBZ 159-2004) , so as to provide technical basis for the future standard revision. The semi-structured interview method was used to interview the industry experts from centers for disease control and prevention, occupational disease prevention and control hospitals/institutes, employers, third-party technical service institutions and universities, and the induction method was used to refine the topics and relevant suggestions. Some technical indicators of GBZ 159 are not suitable for the current actual work of occupational health, and need to be revised and improved urgently. The revised GBZ 159 should comply with the current situation of China's industrial development and the development of occupational health testing equipment in the new era, and improve the relevant technical requirements of sampling quality control.

Applying machine learning random forest (RF) method in predicting the cement products with a co-processing of input materials: Optimizing the hyperparameters.

Co-processing recycled waste during cement production, i.e., using alternative materials such as secondary raw materials or secondary raw fuels, is widely practiced in developed countries. Alternative raw materials or fuels contain high concentrations of heavy metals and other hazardous chemicals, which might lead to the potential for dangerous heavy metals and hazardous chemicals to be transferred to clinker or cement products, resulting in exposure and emissions to people or the environment. Managing input materials and predicting which inputs affect the final concentration is essential to prevent potential hazards. We used the data of six heavy metals by input raw materials and input fuels of cement manufacturers in 2016-2017. The concentrations of Pb and Cu in cement were about 10-200 times and 4 to 200 times higher than other heavy metals (Cr, As, Cd, Hg), respectively. We profiled the influence of heavy metal concentration of each input material using the principal component analysis (PCA), which analyzed the leading causes of each heavy metal. The Random Forest (RF) ensemble model predicted cement heavy metal concentrations according to input materials. In the case of Cu, Cd, and Cr, the training performance showed R square values of 0.71, 0.71, and 0.92, respectively, as a result of predicting the cement heavy metal concentration according to the heavy metal concentration of each cement input material using the RF model, which is a machine learning model. The results of this study show that the RF model can be used to predict the amount and concentration of alternative raw materials and alternative fuels by controlling the concentration of heavy metals in cement through the concentration of heavy metals in the input materials.

Can "Hazard-Cost-Effectiveness Analysis" improve the risk management of chemicals under REACH?

Cost-Effectiveness Analysis (CEA) is a decision-making framework to prioritize policy decisions for chemicals. Differences in hazard profiles among chemicals are not integrated in CEA under the EU REACH Regulation, which could limit its relevance. Another concern is that two different economic decision support methods (CEA for chemicals considered as PBTs or vPvBs from a regulatory perspective and Cost Benefit Analysis (CBA) for others) are used under REACH. To address this situation, we define "Hazard" CEA by integrating a hazard score, based on persistence, bioaccumulation and (eco)toxicity, in the effect indicator of CEA. We test different designs and parameterizations of Hazard-CEA on a set of past socio-economic assessments under REACH for PBT and non-PBT chemicals. Weighing and thresholds in hazard scores do not have a significant impact on the outcome of Hazard-CEA but the design of the hazard scoring method does. We suggest using an integrated and unweighted scoring method with a multiplicative formulation based on the notion of risk. Hazard-CEA could be used for both PBT and non-PBT chemicals, to use a single method in REACH and therefore improve consistency in policy decisions. Our work also suggests that using Hazard-CEA could help make decision easier.

Legacy and Emerging Plasticizers and Stabilizers in PVC Floorings and Implications for Recycling.

Hazardous chemicals in building and construction plastics can lead to health risks due to indoor exposure and may contaminate recycled materials. We systematically sampled new polyvinyl chloride floorings on the Swiss market (n = 151). We performed elemental analysis by X-ray fluorescence, targeted and suspect gas chromatography-mass spectrometry analysis of ortho-phthalates and alternative plasticizers, and bioassay tests for cytotoxicity and oxidative stress, and endocrine, mutagenic, and genotoxic activities (for selected samples). Surprisingly, 16% of the samples contained regulated chemicals above 0.1 wt %, mainly lead and bis(2-ethylhexyl) phthalate (DEHP). Their presence is likely related to the use of recycled PVC in new flooring, highlighting that uncontrolled recycling can delay the phase-out of hazardous chemicals. Besides DEHP, 29% of the samples contained other ortho-phthalates (mainly diisononyl and diisodecyl phthalates, DiNP and DiDP) above 0.1 wt %, and 17% of the samples indicated a potential to cause biological effects. Considering some overlap between these groups, they together make up an additional 35% of the samples of potential concern. Moreover, both suspect screening and bioassay results indicate the presence of additional potentially hazardous substances. Overall, our study highlights the urgent need to accelerate the phase-out of hazardous substances, increase the transparency of chemical compositions in plastics to protect human and ecosystem health, and enable the transition to a safe and sustainable circular economy.

Comparing Adult Smokers Who Switched to JUUL versus Continuing Smokers: Biomarkers of Exposure and of Potential Harm and Respiratory Symptoms.

OBJECTIVES: Real-world evidence on exposure to harmful and potentially harmful constituents (HPHCs) and on biological effects in cigarette smokers who switch to electronic nicotine delivery systems (ENDS) can inform the health effects of switching. AIMS AND METHODS: This cross-sectional, observational study assessed adults who had smoked ≥10 cigarettes/day for ≥10 years, comparing 124 continuing cigarette smokers (Smokers) to 140 former smokers who switched to JUUL-brand ENDS exclusively for ≥6 months (Switchers). Assessments included biomarkers of exposure (BOEs) to select HPHCs, biomarkers of potential harm (BOPHs) related to smoking-related diseases, psychometric assessments of dependence on cigarettes and ENDS, respectively, and respiratory symptoms. Planned analyses compared geometric means, adjusted for demographic covariates; further analyses adjusted for additional lifestyle and smoking history covariates. RESULTS: Nicotine levels were significantly higher in Switchers (median time switched = 3 years), who were unusually heavy users of JUUL. All other BOEs, including NNAL and HPMA3 (primary endpoints), were significantly lower in Switchers than Smokers. Most BOPHs (sICAM-1 [primary], and eg, white blood cell count, MCP1, HbA1c) were significantly lower in Switchers than Smokers; HDL was significantly higher. Switchers reported significantly lower dependence on JUUL than Smokers did on cigarettes, and respiratory symptom scores were significantly lower among Switchers than Smokers. CONCLUSIONS: Compared to continuing smokers, smokers who switched to JUUL had substantially lower exposures to multiple HPHCs, favorable differences in markers of inflammation, endothelial function, oxidative stress, and cardiovascular risk, and fewer respiratory symptoms. These findings suggest that switching from cigarettes to JUUL likely reduces smokers' health risks. IMPLICATIONS: Short-term confinement studies and randomized clinical trials demonstrate that adult smokers who switch completely to ENDS experience substantial reductions in exposure to many smoking-related toxicants. This study extends those findings to longer periods of switching to JUUL-brand ENDS (almost 3 years on average) under naturalistic use conditions in real-world settings and also found that switching to JUUL resulted in favorable differences in BOPHs more proximally related to smoking-induced disease, as well as in respiratory symptoms. Smokers who switch to ENDS reduce their exposure to toxicants, likely reducing their disease risk.

Various additive release from microplastics and their toxicity in aquatic environments.

Additives may be present in amounts higher than 50% within plastic objects. Additives in plastics can be gradually released from microplastics (MPs) into the aquatic environment during their aging and fragmentation because most of them do not chemically react with the polymers. Some are known to be hazardous substances, which can cause toxicity effects on organisms and pose ecological risks. In this paper, the application of functional additives in MPs and their leaching in the environment are first summarized followed by their release mechanisms including photooxidation, chemical oxidation, biochemical degradation, and physical abrasion. Important factors affecting the additive release from MPs are also reviewed. Generally, smaller particle size, light irradiation, high temperature, dissolved organic matter (DOM) existence and alkaline conditions can promote the release of chemicals from MPs. In addition, the release of additives is also influenced by the polymer's structure, electrolyte types, as well as salinity. These additives may transfer into the organisms after ingestion and disrupt various biological processes, leading to developmental malformations and toxicity in offspring. Nonetheless, challenges on the toxicity of chemicals in MPs remain hindering the risk assessment on human health from MPs in the environment. Future research is suggested to strengthen research on the leaching experiment in the actual environment, develop more techniques and analysis methods to identify leaching products, and evaluate the toxicity effects of additives from MPs based on more model organisms. The work gives a comprehensive overview of current process for MP additive release in natural waters, summarizes their toxicity effects on organisms, and provides recommendations for future research.

Toxic Tire Wear Compounds (6PPD-Q and 4-ADPA) Detected in Airborne Particulate Matter Along a Highway in Mississippi, USA.

Tire wear particles (TWPs) are a major category of microplastic pollution produced by friction between tires and road surfaces. This non-exhaust particulate matter (PM) containing leachable toxic compounds is transported through the air and with stormwater runoff, leading to environmental pollution and human health concerns. In the present study, we collected airborne PM at varying distances (5, 15 and 30 m) along US Highway 278 in Oxford, Mississippi, USA, for ten consecutive days using Sigma-2 passive samplers. Particles (~ 1-80 µm) were passively collected directly into small (60 mL) wide-mouth separatory funnels placed inside the samplers. Particles were subsequently subjected to solvent extraction, and extracts were analyzed for TWP compounds by high resolution orbitrap mass spectrometry. This pilot study was focused solely on qualitative analyses to determine whether TWP compounds were present in this fraction of airborne PM. The abundance of airborne TWPs increased with proximity to the road with deposition rates (TWPs cm-2 day-1) of 23, 47, and 63 at 30 m, 15 m, and 5 m from the highway, respectively. Two common TWP compounds (6PPD-Q and 4-ADPA) were detected in all samples, except the field blank, at levels above their limits of detection, estimated at 2.90 and 1.14 ng L-1, respectively. Overall, this work suggests airborne TWPs may be a potential inhalation hazard, particularly for individuals and wildlife who spend extended periods outdoors along busy roadways. Research on the bioavailability of TWP compounds from inhaled TWPs is needed to address exposure risk.

Effect-Directed Analysis Combined with Nontarget Screening to Identify Unmonitored Toxic Substances in the Environment.

Effect-directed analysis (EDA) combined with nontarget screening (NTS) has established a valuable tool for the identification of unmonitored toxic substances in environmental samples. It consists of three main steps: (1) highly potent fraction identification, (2) toxicant candidate selection, and (3) major toxicant identification. Here, we discuss the methodology, current status, limitations, and future challenges of EDA combined with NTS. This method has been applied successfully to various environmental samples, such as sediments, wastewater treatment plant effluents, and biota. We present several case studies and highlight key results. EDA has undergone significant technological advancements in the past 20 years, with the establishment of its key components: target chemical analysis, bioassays, fractionation, NTS, and data processing. However, it has not been incorporated widely into environmental monitoring programs. We provide suggestions for the application of EDA combined with NTS in environmental monitoring programs and management, with the identification of further research needs.

Analysis and derivation of the marine water quality criteria of phenol for Korean seas.

Marine water quality criteria (WQC) have to be determined prior to the derivation of water quality based effluent limitations (WQBELs) for hazardous and noxious substances (HNS) discharged from marine industrial facilities. In this study, we carried out toxicity tests using ten native marine organisms and analyzed international toxicity data and data tested in this study to derive the WQC of phenol for Korean seas. By converting acute values to chronic ones with ACRs (acute-chronic ratios) of each trophic level according to well-verified method, we derived provisional WQC (0.96 mg/L) of phenol for Korean seas for the first time. The procedure to derive marine WQC and results of this study could provide the essential information for the establishment of national marine WQC and WQBELs for HNS discharged from marine industrial facilities.

Innovate beyond PFAS.

New proposed legislation on "forever" chemicals is under consideration in Europe and the United States, where per- and polyfluoroalkyl substances (PFAS) are a hot topic for regulators and lawmakers. On both sides of the Atlantic, regulation of widely used PFAS has been complex and evolving. Their presence in hundreds of different products-from nonstick cookware to food packaging to firefighting foam-and their persistence in food, drinking water, and the environment have resulted in a pollution problem of unprecedented scale. Recently, for example, it was reported that 45% of the tap water in the United States contains at least one type of PFAS. Because these compounds are so chemically stable that they do not degrade in the environment (including in the human body), PFAS seriously challenge long-established ideas of how chemicals can be used, assessed, and regulated, and it remains to be seen whether the new regulations will solve this problem.

Carbon disulfide removal from gasoline fraction using zinc-carbon composite synthesized using microwave-assisted homogenous precipitation.

Carbon disulfide (CS2) is one of the sulfur components that are naturally present in petroleum fractions. Its presence causes corrosion issues in the fuel facilities and deactivates the catalysts in the petrochemical processes. It is a hazardous component that negatively impacts the environment and public health due to its toxicity. This study used zinc-carbon (ZC) composite as a CS2 adsorbent from the gasoline fraction model component. The carbon is derived from date stone biomass. The ZC composite was prepared via a homogenous precipitation process by urea hydrolysis. The physicochemical properties of the prepared adsorbent are characterized using different techniques. The results confirm the loading of zinc oxide/hydroxide carbonate and urea-derived species on the carbon surface. The results were compared by the parent samples, raw carbon, and zinc hydroxide prepared by conventional and homogeneous precipitation. The CS2 adsorption process was performed using a batch system at atmospheric pressure. The effects of adsorbent dosage and adsorption temperatures have been examined. The results indicate that ZC has the highest CS2 adsorption capacity (124.3 mg.g-1 at 30 °C) compared to the parent adsorbents and the previously reported data. The kinetics and thermodynamic calculation results indicate the spontaneity and feasibility of the CS2 adsorption process.

Environmental risk assessment near a typical spent lead-acid battery recycling factory in China.

In recent years, environmental pollution and public health incidents caused by the recycling of spent lead-acid batteries (LABs) has becoming more frequent, posing potential risk to both the ecological environment and human health. Accurately assessing the environmental risk associated with the recycling of spent LABs is a prerequisite for achieving pollution control. In this study, a spent LABs recycling factory in Chongqing was investigated through on-site investigation, sample analysis. Exposure assessment and health risk assessment were also conducted. The results showed that: firstly, Pb and As concentrations exceeding the standard limit values were found in the environmental air and vegetables near the spent LABs recycling factory. Secondly, exposure assessment results showed that total average daily exposure to hazardous substances for children (3.46 × 10-2 mg/kg) is higher than for adults (4.80 × 10-2 mg/kg). The main exposure pathways for Pb, Cr, Ni, Cu, Zn, and Hg are ingestion of vegetables, while those for Cd, As, and Sb are through inhalation. Thirdly, health risk assessment results indicate that environmental exposure poses unacceptable non-carcinogenic and carcinogenic risk to both adults and children near the spent LABs recycling factory, with children facing higher risk than adults. Pb and As are the main contributors to non-carcinogenic risk, and Ni and As are the main contributors to unacceptable carcinogenic risk. In particular, As, has a greater contribution to total carcinogenic risk index through inhalation than vegetable ingestion. Overall, vegetable ingestion and inhalation are the main exposure pathways for non-carcinogenic and carcinogenic risk. Consequently, future risk assessment should focus on the impact of hazardous substances on children, as well as the health risk associated with ingestion of vegetables and inhalation. Our findings will provide basic information for proposing measures of environmental risk prevention during the recycling of spent LABs, for example, controlling of As in exhaust gas emissions.